User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: Honeywell 1887-TCD:Differential Plug In DATE: 27-Sep-96 AUTHOR: User Contributed REVISION: ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 38 NUMBER OF LINES: 314 CONFIGURATION: Fluke 5700A CONFIGURATION: Datron 1281 ============================================================================= STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R N P M F W 1.002 ASK+ X 1.003 HEAD ÍÍ INITIAL CONDITIONS ÍÍ 1.004 DISP Make sure that the 1858 mainframe is OFF. 1.005 DISP Set the jumper J2 on the UUT A1 board from C to 1. 1.005 DISP 1.005 DISP Set the jumper J1 on the UUT A1 board from C to 2. 1.006 DISP Insert the UUT into any odd/even channel set in 1.006 DISP the 1858 Visicorder mainframe. 1.007 DISP Open the paper access door to expose CRT face. 1.008 DISP Turn power on. 1.009 HEAD {} 1.010 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 1.011 HEAD {º Trace Multplier Tests º} 1.012 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 1.013 HEAD ÍÍ Trace Multplier Tests ÍÍ 1.014 JMP 2.001 1.015 EVAL 2.001 DISP ÿÿÿÿÿÿÿÿSet the 1858 as follows: 2.001 DISP RECORD TIMER ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] OFF 2.001 DISP TIMELINE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] OFF 2.001 DISP GRIDLINE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] CONT. 2.001 DISP RECORD SPEED ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1 in/sec 2.001 DISP MULTIPLIER ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 0.1 2.001 DISP DRIVE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] ON 2.002 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 2.002 DISP TRACE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] X1 2.002 DISP V/DIV VAR potÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] CAL (CW) 2.002 DISP SENSE V/DIV ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1 2.002 DISP TAPE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] PAR 2.003 DISP Using the dedicated cable labeled 1887 EVEN CHANNEL 2.003 DISP connect the UUT to the 5700 as follows: 2.003 DISP 'A' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 5700 V/ê/A HI 2.003 DISP 'C' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 5700 V/ê/A LO 2.003 DISP 'E' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 5700 V/ê/A LO 2.004 5700 0V S 2W 2.005 DISP Adjust the UUT position control to bring the spot 2.005 DISP on the CRT face to the center gridline dot. 2.006 5700 3V S 2W 2.007 DISP Adjust the TRIM control for a CRT deflection 2.007 DISP of 3 major divisions (15 dots) to the left. 2.008 MESS Adjust the stimulus for a CRT deflection of 3 major 2.008 MESS divisions (15 dots) to the right. 2.009 5700 -3.00V 1.0% 2W #! Test Tol 0.03, Sys Tol 1.9e-005, TUR 1578.947 (>= 4.00). 3.001 MESS 3.002 DISP Set the UUT TRACE switch to X2. 3.003 5700 0V S 2W 3.004 DISP Adjust the UUT POSITION control so the spot 3.004 DISP is on the extreme right side accented dot. 3.005 MESS Adjust the stimulus for a deflection of 2 major div. 3.006 5700 1.00V 1% 2W #! Test Tol 0.01, Sys Tol 7.2e-006, TUR 1388.889 (>= 4.00). 4.001 MESS 4.002 DISP Set the UUT TRACE switch to X4. 4.003 5700 0V S 2W 4.004 DISP Adjust the UUT POSITION control so the spot 4.004 DISP is on the extreme right side accented dot. 4.005 MESS Adjust the stimulus for a deflection of 4 major div. 4.006 5700 1.00V 1% 2W #! Test Tol 0.01, Sys Tol 7.2e-006, TUR 1388.889 (>= 4.00). 5.001 HEAD {} 5.002 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 5.003 HEAD {º Sensitivity Tests º} 5.004 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 5.005 HEAD ÍÍ Sensitivity Tests ÍÍ 5.006 JMP 6.001 5.007 EVAL 6.001 DISP Set the UUT SENS to .01 V/DIV, and TRACE to X1. 6.002 5700 0V S 2W 6.003 DISP Adjust the UUT POSITION control so the spot 6.003 DISP is on the extreme right side accented dot. 6.004 MESS Adjust the stimulus for a deflection of 6 major div. 6.005 5700 60.00mV 1.0% 2W #! Test Tol 0.0006, Sys Tol 1.17e-006, TUR 512.821 (>= 4.00). 7.001 DISP Set the UUT SENS to .02 V/DIV. 7.002 5700 0V S 2W 7.003 DISP Adjust the UUT POSITION control so the spot 7.003 DISP is on the extreme right side accented dot. 7.004 MESS Adjust the stimulus for a deflection of 6 major div. 7.005 5700 120.00mV 1.0% 2W #! Test Tol 0.0012, Sys Tol 1.59e-006, TUR 754.717 (>= 4.00). 8.001 DISP Set the UUT SENS to .05 V/DIV. 8.002 5700 0V S 2W 8.003 DISP Adjust the UUT POSITION control so the spot 8.003 DISP is on the extreme right side accented dot. 8.004 MESS Adjust the stimulus for a deflection of 6 major div. 8.005 5700 300.00mV 1.0% 2W #! Test Tol 0.003, Sys Tol 3e-006, TUR 1000.000 (>= 4.00). 9.001 DISP Set the UUT SENS to .1 V/DIV. 9.002 5700 0V S 2W 9.003 DISP Adjust the UUT POSITION control so the spot 9.003 DISP is on the extreme right side accented dot. 9.004 MESS Adjust the stimulus for a deflection of 6 major div. 9.005 5700 0.6000V 1.0% 2W #! Test Tol 0.006, Sys Tol 4.8e-006, TUR 1250.000 (>= 4.00). 10.001 DISP Set the UUT SENS to .2 V/DIV. 10.002 5700 0V S 2W 10.003 DISP Adjust the UUT POSITION control so the spot 10.003 DISP is on the extreme right side accented dot. 10.004 MESS Adjust the stimulus for a deflection of 6 major div. 10.005 5700 1.2000V 1.0% 2W #! Test Tol 0.012, Sys Tol 8.4e-006, TUR 1428.571 (>= 4.00). 11.001 DISP Set the UUT SENS to .5 V/DIV. 11.002 5700 0V S 2W 11.003 DISP Adjust the UUT POSITION control so the spot 11.003 DISP is on the extreme right side accented dot. 11.004 MESS Adjust the stimulus for a deflection of 6 major div. 11.005 5700 3.0000V 1.0% 2W #! Test Tol 0.03, Sys Tol 1.9e-005, TUR 1578.947 (>= 4.00). 12.001 DISP Set the UUT SENS to 2 V/DIV. 12.002 5700 0V S 2W 12.003 DISP Adjust the UUT POSITION control so the spot 12.003 DISP is on the extreme right side accented dot. 12.004 MESS Adjust the stimulus for a deflection of 6 major div. 12.005 5700 12.000V 1.0% 2W #! Test Tol 0.12, Sys Tol 6.8e-005, TUR 1764.706 (>= 4.00). 13.001 DISP Set the UUT SENS to 5 V/DIV. 13.002 5700 0V S 2W 13.003 DISP Adjust the UUT POSITION control so the spot 13.003 DISP is on the extreme right side accented dot. 13.004 MESS Adjust the stimulus for a deflection of 6 major div. 13.005 5700 30.000V 1.0% 2W #! Test Tol 0.3, Sys Tol 0.00028, TUR 1071.429 (>= 4.00). 14.001 DISP Set the UUT SENS to 10 V/DIV. 14.002 5700 0V S 2W 14.003 DISP Adjust the UUT POSITION control so the spot 14.003 DISP is on the extreme right side accented dot. 14.004 MESS Adjust the stimulus for a deflection of 6 major div. 14.005 5700 60.000V 1.0% 2W #! Test Tol 0.6, Sys Tol 0.00046, TUR 1304.348 (>= 4.00). 15.001 HEAD {} 15.002 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍ»} 15.003 HEAD {º Linearity º} 15.004 HEAD {ÈÍÍÍÍÍÍÍÍÍÍͼ} 15.005 HEAD ÍÍ Linearity ÍÍ 15.006 JMP 16.001 15.007 EVAL 16.001 5700 0V S 2W 16.002 DISP Adjust the UUT POSITION control so the spot 16.002 DISP is on the extreme right side accented dot. 16.003 5700 60.000V S 2W 16.004 DISP Adjust the UUT TRIM control for a CRT deflection 16.004 DISP of exactly 6 major divisions. 16.005 MESS Adjust the stimulus for 5 major divisions. 16.006 5700 50.00V 0.3U 2W #! Test Tol 0.3, Sys Tol 0.0004, TUR 750.000 (>= 4.00). 17.001 MESS Adjust the stimulus for 4 major divisions. 17.002 5700 40.00V 0.3U 2W #! Test Tol 0.3, Sys Tol 0.00034, TUR 882.353 (>= 4.00). 18.001 MESS Adjust the stimulus for 3 major divisions. 18.002 5700 30.00V 0.3U 2W #! Test Tol 0.3, Sys Tol 0.00028, TUR 1071.429 (>= 4.00). 19.001 MESS Adjust the stimulus for 2 major divisions. 19.002 5700 20.00V 0.3U 2W #! Test Tol 0.3, Sys Tol 0.000108, TUR 2777.778 (>= 4.00). 20.001 MESS Adjust the stimulus for 1 major divisions. 20.002 5700 10.00V 0.3U 2W #! Test Tol 0.3, Sys Tol 5.4e-005, TUR 5555.556 (>= 4.00). 21.001 MESS 21.002 HEAD {} 21.003 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 21.004 HEAD {º Frequency Response - Input to 1858 º} 21.005 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 21.006 HEAD ÍÍ Frequency Response - Input to 1858 ÍÍ 21.007 JMP 22.001 21.008 EVAL 22.001 DISP Set the UUT SENS switch for .1 V/DIV. 22.002 5700 0V S 2W 22.003 DISP Adjust the POS control to center the dot. 22.004 5700 0.15V 400H S 2W 22.005 DISP Adjust the TRIM control for a 6 division 22.005 DISP peak-to-peak deflection. 22.006 MESS Adjust the stimulus for a 6 division peak-to-peak 22.006 MESS deflection. 22.007 5700 0.150V -0.00% +0.50% 10H 2W #! Test Tol 0.003, Sys Tol 0.00043, TUR 6.977 (>= 4.00). 23.001 MESS Adjust the stimulus for a 6 division peak-to-peak 23.001 MESS deflection. 23.002 5700 0.150V -0.00% +0.50% 60H 2W #! Test Tol 0.003, Sys Tol 5.2e-005, TUR 57.692 (>= 4.00). 24.001 MESS Adjust the stimulus for a 6 division peak-to-peak 24.001 MESS deflection. 24.002 5700 0.150V -0.00% +0.50% 100H 2W #! Test Tol 0.003, Sys Tol 5.2e-005, TUR 57.692 (>= 4.00). 25.001 MESS Adjust the stimulus for a 6 division peak-to-peak 25.001 MESS deflection. 25.002 5700 0.150V -0.00% +0.50% 1kH 2W #! Test Tol 0.003, Sys Tol 5.2e-005, TUR 57.692 (>= 4.00). 26.001 MESS Adjust the stimulus for a 6 division peak-to-peak 26.001 MESS deflection. 26.002 5700 0.150V -0.00% +1.30% 2kH 2W #! Test Tol 0.0078, Sys Tol 5.2e-005, TUR 150.000 (>= 4.00). 27.001 MESS Adjust the stimulus for a 6 division peak-to-peak 27.001 MESS deflection. 27.002 5700 0.150V -0.00% +3.00% 3kH 2W #! Test Tol 0.018, Sys Tol 5.2e-005, TUR 346.154 (>= 4.00). 28.001 MESS Adjust the stimulus for a 6 division peak-to-peak 28.001 MESS deflection. 28.002 5700 0.150V -0.00% +8.00% 5kH 2W #! Test Tol 0.048, Sys Tol 5.2e-005, TUR 923.077 (>= 4.00). 29.001 HEAD {} 29.002 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 29.003 HEAD {º Frequency Response - Input to Tape Output º} 29.004 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 29.005 HEAD ÍÍ Frequency Response - Input to Tape Output ÍÍ 29.006 JMP 30.001 29.007 EVAL 30.001 DISP Using the dedicated cable labeled 1887 ODD CHANNEL 30.001 DISP connect the UUT to the 1281 as follows: 30.001 DISP 'C' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1281 HI 30.001 DISP 'E' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1281 LO 30.002 ASK- U 30.003 5700 0.15V 400H S 2W 30.004 IEEE [@1281]*RST 30.005 IEEE [@1281]ACV AUTO; DB ON 30.006 IEEE [@1281]RDG?[D2000][T0][I] 30.007 MEME >1 30.008 IEEE [@1281]ACV FILT10HZ 30.009 5700 0.15V 10H S 2W 30.010 ASK+ U 30.011 IEEE [@1281]RDG?[D2000][T0][I] 30.012 MATH MEM = MEM - M[1] 30.013 ACC 0.00D 0.003U 30.014 MEME 30.015 MEMC D +0.5U -1U 10H #! Test Tol 0.5, Sys Tol 0.003, TUR 166.667 (>= 4.00). 31.001 IEEE [@1281]ACV FILT100HZ 31.002 ASK- U 31.003 5700 0.15V 100H S 2W 31.004 ASK+ U 31.005 IEEE [@1281]RDG?[D2000][T0][I] 31.006 MATH MEM = MEM - M[1] 31.007 ACC 0.00D 0.003U 31.008 MEME 31.009 MEMC D +0.5U -1U 100H #! Test Tol 0.5, Sys Tol 0.003, TUR 166.667 (>= 4.00). 32.001 ASK- U 32.002 5700 0.15V 1kH S 2W 32.003 ASK+ U 32.004 IEEE [@1281]RDG?[D2000][T0][I] 32.005 MATH MEM = MEM - M[1] 32.006 ACC 0.00D 0.003U 32.007 MEME 32.008 MEMC D +0.5U -1U 1kH #! Test Tol 0.5, Sys Tol 0.003, TUR 166.667 (>= 4.00). 33.001 ASK- U 33.002 5700 0.15V 10kH S 2W 33.003 ASK+ U 33.004 IEEE [@1281]RDG?[D2000][T0][I] 33.005 MATH MEM = MEM - M[1] 33.006 ACC 0.00D 0.003U 33.007 MEME 33.008 MEMC D +0.5U -1U 10kH #! Test Tol 0.5, Sys Tol 0.003, TUR 166.667 (>= 4.00). 34.001 ASK- U 34.002 5700 0.15V 30kH S 2W 34.003 ASK+ U 34.004 IEEE [@1281]RDG?[D2000][T0][I] 34.005 MATH MEM = MEM - M[1] 34.006 ACC 0.00D 0.010U 34.007 MEME 34.008 MEMC D +0.5U -1U 30kH #! Test Tol 0.5, Sys Tol 0.01, TUR 50.000 (>= 4.00). 35.001 ASK- U 35.002 5700 0.15V 50kH S 2W 35.003 ASK+ U 35.004 IEEE [@1281]RDG?[D2000][T0][I] 35.005 MATH MEM = MEM - M[1] 35.006 ACC 0.00D 0.010U 35.007 MEME 35.008 MEMC D +0.5U -1U 50kH #! Test Tol 0.5, Sys Tol 0.01, TUR 50.000 (>= 4.00). 36.001 ASK- U 36.002 5700 0.15V 80kH S 2W 36.003 ASK+ U 36.004 IEEE [@1281]RDG?[D2000][T0][I] 36.005 MATH MEM = MEM - M[1] 36.006 ACC 0.00D 0.010U 36.007 MEME 36.008 MEMC D +1.0U -1.5U 80kH #! Test Tol 1, Sys Tol 0.01, TUR 100.000 (>= 4.00). 37.001 ASK- U 37.002 5700 0.15V 100kH S 2W 37.003 ASK+ U 37.004 IEEE [@1281]RDG?[D2000][T0][I] 37.005 MATH MEM = MEM - M[1] 37.006 ACC 0.00D 0.010U 37.007 MEME 37.008 MEMC D +1.5U -3U 100kH #! Test Tol 1.5, Sys Tol 0.01, TUR 150.000 (>= 4.00). 38.001 HEAD {} 38.002 DISP {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 38.002 DISP {º THIS COMPLETES THE VERIFICATION º} 38.002 DISP {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 38.003 END #! T.U.R.s less than 4.00: 0 #! T.U.R.s estimated using RANGE value: 0 #! T.U.R.s not calculated (ASK- U): 0 #! T.U.R.s not computable at compile time: 0 #! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.